Security Training Script
Welcome to [EPF] Security training!
I will be your instructor for today’s training. Address me only as “Sir/Ma’am”.
During this training, you will learn:
Security Commands, Responsibilities, and how-to properly FTE.
I ask you to remain silent and stay attentive for the duration of this training.
Do not AFK during this training and only talk when spoken to, other than that lets begin.
The first thing we will discuss is the responsibilities of the Security Division.
As a Security member, your job is to make sure that the welfare of the base is in good standing.
You will do this by making sure every person who passes through the gates has the right credentials.
By this I mean that their badge uniform and motto are correct.
Also stay alert for trolls by making sure that you do not let them come inside through FTE.
Another task of the division is to run periodic patrols, you can choose not to participate.
Participating in patrol wills contribute towards promotions however so they are recommended.
Any questions about your duties?
(wait for response)
Well then, let’s continue. We will now cover the commands you need to remember as Security.
The commands are as follows: FTE, PTH, SR, CTH, and GG.
FTE stands for Fill The Entrance. The entrance is the main hub for security members.
You shouldn’t be in FTE unless someone is looking to come inside, or unless FTF is full.
We will cover how to operate FTE later in the training.
PTH stands for Patrol The Halls. When called to PTH you should clear the base for trolls.
You should make sure that no one that isn’t supposed to be in HQ is around.
After you PTH, you will be called into SR, which stands for Status Report.
When called to SR you will discuss your findings to your commanding officer.
Lastly, CTH stands for Clear The Halls. CTH means get everyone out of the halls and into a seat.
You should move all members ranking lower than you to FTF or FTM. Do not try to make HRs CTH.
Do you understand the commands of the Security Division?
(Wait for response)
Now we will move on to how to actually operate FTE.
For this segment of the training we will move into the security simulator.
(transfer security recruit into simulator)
From here you need to know 4 basic commands.
:gate1 opens the primary gate and allows the client to enter the FTE Station.
Once inside depending on if they are a recruit, employee or troll you will take different actions.
If they are a recruit, immediately transfer them to the training area by typing :training.
Try so now.
(wait for them to try it)
If the client is an employee you must ask them to whisper you their promoters name.
If they do not remember their promoters name you ask them for 3 EPF rules.
If they know the rules let them in, if not type in :lobby to kick them out.
Remember it is your job to only let people with the correct B/U/M. inside.
If the person has all the right credentials you do the final step and let them in with :gate2
Do not let more than 2 people into the gate at one time.
Also be sure to confirm the employee is telling you the right promoter.
Be sure to remember: (:lobby, :gate1, :gate2, and :training).
Do you have any last questions?
(answer any questions)
Other than that, I congratulate you for completing training.
Please make your motto: [EPF] Security Trainee [Tag].
Welcome to the division, and make us proud. If you have any further questions ask me at base.
BTB.
Welcome to [EPF] Security training!
I will be your instructor for today’s training. Address me only as “Sir/Ma’am”.
During this training, you will learn:
Security Commands, Responsibilities, and how-to properly FTE.
I ask you to remain silent and stay attentive for the duration of this training.
Do not AFK during this training and only talk when spoken to, other than that lets begin.
The first thing we will discuss is the responsibilities of the Security Division.
As a Security member, your job is to make sure that the welfare of the base is in good standing.
You will do this by making sure every person who passes through the gates has the right credentials.
By this I mean that their badge uniform and motto are correct.
Also stay alert for trolls by making sure that you do not let them come inside through FTE.
Another task of the division is to run periodic patrols, you can choose not to participate.
Participating in patrol wills contribute towards promotions however so they are recommended.
Any questions about your duties?
(wait for response)
Well then, let’s continue. We will now cover the commands you need to remember as Security.
The commands are as follows: FTE, PTH, SR, CTH, and GG.
FTE stands for Fill The Entrance. The entrance is the main hub for security members.
You shouldn’t be in FTE unless someone is looking to come inside, or unless FTF is full.
We will cover how to operate FTE later in the training.
PTH stands for Patrol The Halls. When called to PTH you should clear the base for trolls.
You should make sure that no one that isn’t supposed to be in HQ is around.
After you PTH, you will be called into SR, which stands for Status Report.
When called to SR you will discuss your findings to your commanding officer.
Lastly, CTH stands for Clear The Halls. CTH means get everyone out of the halls and into a seat.
You should move all members ranking lower than you to FTF or FTM. Do not try to make HRs CTH.
Do you understand the commands of the Security Division?
(Wait for response)
Now we will move on to how to actually operate FTE.
For this segment of the training we will move into the security simulator.
(transfer security recruit into simulator)
From here you need to know 4 basic commands.
:gate1 opens the primary gate and allows the client to enter the FTE Station.
Once inside depending on if they are a recruit, employee or troll you will take different actions.
If they are a recruit, immediately transfer them to the training area by typing :training.
Try so now.
(wait for them to try it)
If the client is an employee you must ask them to whisper you their promoters name.
If they do not remember their promoters name you ask them for 3 EPF rules.
If they know the rules let them in, if not type in :lobby to kick them out.
Remember it is your job to only let people with the correct B/U/M. inside.
If the person has all the right credentials you do the final step and let them in with :gate2
Do not let more than 2 people into the gate at one time.
Also be sure to confirm the employee is telling you the right promoter.
Be sure to remember: (:lobby, :gate1, :gate2, and :training).
Do you have any last questions?
(answer any questions)
Other than that, I congratulate you for completing training.
Please make your motto: [EPF] Security Trainee [Tag].
Welcome to the division, and make us proud. If you have any further questions ask me at base.
BTB.